Condition
Coagulant, pH adjustment, and polymer are selected to destabilize contaminants and build a strong floc.
A Wild Pack Holdings companyLINXFLOAT · Linx Equipment family 01
LINXEQUIPMENTConfigure LINXFLOATLINX EQUIPMENT FAMILY 01
LINXFLOAT
Dissolved air flotation
LinxFloat removes suspended solids, fats, oils, grease, and chemically conditioned floc by lifting them to the surface for controlled skimming.
WHAT IT DOES
The process inside the equipment.
LinxFloat is the primary flotation family for wastewater that contains light solids, emulsified oil, grease, or precipitated material that does not settle efficiently. Upstream chemistry destabilizes the contaminants and builds a separable floc.
A pressurized recycle stream releases fine air bubbles into the influent. Those bubbles attach to the conditioned solids and carry them to the surface, where a mechanical skimmer removes the floated sludge while clarified water exits below.
HOW IT WORKS
A controlled path from influent to result.
Release air
The recycle system dissolves air under pressure and releases fine bubbles into the incoming water.
Float + separate
Bubbles lift the conditioned solids while clarified water moves through the lower section of the vessel.
Skim + transfer
Surface sludge is mechanically removed and sent to storage, thickening, or LinxPress dewatering.
EQUIPMENT CAPABILITIES
Built around the duty—not a fixed catalog box.
- Pressurized recycle and microbubble generation
- Vertical whitewater loop or application-sized saturator
- Chain-and-flight or compact surface skimming
- Polymer injection and upstream conditioning interfaces
- Integrated sludge collection and transfer
- Level, flow, pressure, turbidity, and diversion control options
AVAILABLE CONFIGURATIONS
A starting platform for application engineering.
Compact
25–300 GPMSmall-footprint skid with vertical whitewater loop and integrated polymer injection options.Standard
500–2,000 GPMContinuous-duty platform with chain-and-flight skimming and application-sized recycle system.Mobile
150–500 GPMTrailerized package for bypass, rental, pilot, startup, or temporary treatment.Published ranges identify current Linx platform configurations. Final hydraulic capacity, materials, loading, retention, utility demand, and performance basis are established for the application.
BEST-FIT APPLICATIONS
Where LINXFLOAT earns its place.
- Food and beverage wastewater
- Meat and poultry processing
- Industrial pretreatment
- Oily wastewater and refinery service
- Municipal or industrial bypass
- Rental, pilot, and emergency treatment
DESIGN DATA REQUIRED
What Linx needs to size it.
- Average, peak, and sustained flow
- TSS, FOG, COD, temperature, and pH
- Jar-test or treatability results
- Expected sludge loading and handling method
- Available footprint and elevation
- Discharge target and downstream process
TREATMENT-TRAIN INTEGRATION
Designed as a family. Connected as a system.
Screening, equalization, LinxReact conditioning, and LinxDose chemical or polymer feed.
→Flotation, clarified-water collection, sludge skimming, recycle, and operating controls.
→LinxPolish filtration, reuse or discharge, plus sludge storage and LinxPress dewatering.
CONFIGURE LINXFLOAT
Start with the water, duty, and operating result.
Send the available flow and laboratory data, treatment target, site constraints, utilities, schedule, and operating plan. Linx will turn those inputs into a buildable LINXFLOAT design basis and integrated equipment concept.